A Breville espresso maker is a great addition to any coffee lover’s kitchen. It makes delicious espresso in minutes with the touch of a button. However, like all appliances, it needs to be properly maintained in order to continue to operate at its best. One important maintenance task that should be done occasionally is descaling the machine. This article will teach you how to descale a Breville espresso maker.
How To Descale A Breville Espresso Maker
There are a few ways that you can descale your Breville espresso maker. One way is to use a commercial descaling product specifically made for coffee machines. Another way is to make a descaling solution using white vinegar and water. Pour the vinegar and water into the water tank and run the machine on the highest setting for several minutes. Be sure to discard the brewed vinegar solution and rinse out the machine thoroughly before using it again.
– descaling solution – breville descaling kit – white vinegar – water – paper towels – bucket or container
- Place a cup or mug under the steam wand and turn it on. pump the solution through the machine
- Brew a pot of descaling solution using the brew button
- Pour the solution into the water tank
below – descale the espresso maker every 2-3 months, or more frequently if you notice mineral build-up on the machine – use a descaling solution made specifically for coffee makers- fill the water tank with cold water and add the descaling solution according to the manufacturer’s instructions- turn on the machine and let it run for its entire cycle- after the cycle is complete, empty the drip tray and rinse all removable parts with hot water
Frequently Asked Questions
How Do I Turn Off The Descale Light On My Breville?
The descale light on your Breville is turned off by following the same steps used to turn it on.
How Do You Reset A Breville Barista Express?
There are three ways to reset a Breville Barista Express: 1. Hold down the ‘Power’ and ‘Volts/sqrt’ buttons for 10 seconds. 2. Unplug the machine, wait 10 seconds, then plug it back in. 3. Remove the water tank and hold down the ‘On/Off’ button for 10 seconds.
How Do I Descale My Espresso Machine?
To descale an espresso machine, you will need to use a descaling solution specifically made for espresso machines. You can find these solutions at most coffee shops or online. Fill the reservoir of your espresso machine with the descaling solution according to the manufacturer’s instructions and run the machine until empty. Dispose of the solution according to the manufacturer’s instructions and rinse all parts of the machine with clean water.
To Review
The best way to descale a Breville espresso maker is by using white vinegar. Fill the water tank with white vinegar and brew a pot of espresso. Allow the vinegar to sit in the machine for 30 minutes before rinsing with water.