How To Get Descale Light Off On Keurig Duo

The Keurig Duo coffee maker has a descale light that comes on to indicate when it needs to be descaled. This light can be turned off by following these instructions: 1. Unplug the coffee maker. 2. Remove the water reservoir. 3. Look for a small black tab on the bottom of the reservoir and push down on it with a pen or paper clip. 4. Replace the water reservoir and plug in the coffee maker. 5.

How To Get Descale Light Off On Keurig Duo

There are a few ways to get the descale light off on a Keurig duo. One way is to descale the machine using vinegar. Another way is to use a descaling tablet.

You will need a descaling solution, water, and a container to catch the descaling solution.

  • Place a mug on the platform and close the lid
  • Ensure that the water reservoir is full
  • Press the “brew” button. after brewing is complete, wait for the machine to beep before removing

below 1. Make sure that the water reservoir is empty and clean. 2. Fill the water reservoir with fresh cold water. 3. Place a mug or carafe on the drip tray. 4. Insert a K-Cup pod into the brewer. 5. Press the power button to turn on the brewer. 6. Hold down the descale button for five seconds, or until the descale light goes off. 7. Release the descale button and


Frequently Asked Questions

How Do You Reset The Descale Button On A Keurig?

The descale button on a Keurig coffee maker is used to reset the machine and helps to clean out any built-up coffee grounds or residue. To reset the descale button, hold down the button for five seconds until the light flashes.

Why Won’T The Descale Light Go Off On My Keurig?

By descaling your Keurig, you are removing any built-up calcium or lime deposits from the machine. If the descale light does not go off, it means that there is still some build-up in the machine and it will need to be descaled again.

How Do You Reset The Descale On A Keurig Duo?

The descale function on a Keurig duo can be reset by holding down the stop button and the brew button simultaneously for five seconds.


To Summarize

Keurig’s descale light can be a bit daunting, but it is easy to get rid of. Simply follow the manufacturer’s instructions and use a descaling solution.

Leave a Comment